[Translate to "EN"] Y-Filter für Anlagenbau mit Flansch

Y-Type Strainer with Flanges ANSI, PN25, PN40

The y-type strainer is the most common and economical type of strainer for permanent applications, suitable for liquid, steam and gas mediums. Due to quick cleaning y-type strainers are used in manifold manners. Other advantages of the y-type strainers are the large filtration area, which provides a high filtration capacity, a low pressure loss and therefore longer operation time.

The y-strainers consists of a housing with opposite arranged in- and outlet flanges at the same level. Between these connections is a basket strainer made of a perforated plate, optionally covered with a cloth consisting of various materials and mesh widths. The medium to be filtered will enter the filter from the inside to the outside. Hence, the contaminations will remain within the strainer insert. The y-strainer could be depressurizing through the venting or draining devices. After removing of the cover the complete basket strainer could be easily removed off the filter housing. Now the strainer can be cleaned by blowing out or blasting using compressed air, steam, or water. If necessary, the strainer should be soaked and cleaned using a suitable agent. Possibly, an optimal cleaning will be obtained using ultrasonic.
y-strainer can be installed both in the horizontal and vertical positions without any effect on the performance.

Downloads

Details to the y-type strainers with flanges like installation length and available materials:

General information to y-type strainer with flanges:
Y-Type Strainer
Mesh Aperture Size
Inquiry Sheet Strainer

Advantages

  • reasonable strainer
  • standard types available from stock
  • larger filtration area
  • lower pressure loss
  • longer intervals until next cleaning
  • permanent filtration of the medium
  • suitable for mounting in horizontal and vertical pipelines
  • no disassemble of the filter housing for cleaning is necessary
  • simple handling / basket cleansing
  • low-maintenance
  • reusable elements
  • contamination level indicator (optional)


Strainer Types for Industrial Applications

Y Type Strainer in PN16

The cost-effective strainer in PN16 from stock

Y-Type Strainer ANSI, PN25, PN40

Y-Type Strainer with a large filter area is requested

Y-Type Strainer Screwed

The Y-Type Strainer for pressure up to 136 bar

Y-Type Strainer Socket Weld

High pressure up to 136 bar available

Mono-In-Line Strainer

For a tool-free and comfortable basket cleaning

Duplex-Strainer

If interruption-free plant operation is important!

T-Type Strainer

Short build in length (butt weld) and flanges available

Temporary Strainer

For the temporary use while start up and commissioning

Stainless Steel Strainer

Stainless Steel Strainer

Kontakt

tecmara gmbh
Tel.: +49 (0) 3841-32750-70
sales@tecmara.de