"Bath tub" strainers also called T-Type Strainers are a good alternative to other cast strainers. They are available from 2" (DN50) to 12" (DN300) as standard. For special specifications the T-Type Strainer can be maufactured up to 48" (DN1200), with a pressure rate up to 2500 LB according to ASME B16.5. Also special materials are available.
The butt welds allow a very stable connection to the pipe. The strainer is available with flanges as well. The screen has a V-design. For a lower pressure loss the filter area can be increased with a W-design.
Very often T-Type Strainers will be used during start up or after revision. After the cleaning process the sieve will be taken off and the strainer body will remain in the pipe. The bath tub strainer has a big advantage in comperison to temporary strainers since the pipe must not be opend when the screen has been retrieved from the pipe.
Details to T-Type Strainer with flanges, like installation length and available materials:
Details to T-Type Strainer butt weld, like installation length and available materials:
General information to T-type strainers:All Mesh Aperture Sizes Inquiry Sheet Strainer
- permanent filtration of the medium
- suitable for mounting in horizontal and vertical pipelines
- no disassemble of the filter housing for cleaning is necessary
- simple handling / basket cleansing
- reusable elements
- mit an optional lifting david available
- contamination level indicator (optional)
Strainer Types for Industrial Applications
The cost-effective strainer in PN16 from stock
Y-Type Strainer with a large filter area is requested
The Y-Type Strainer for pressure up to 136 bar
High pressure up to 136 bar available
For a tool-free and comfortable basket cleaning
If interruption-free plant operation is important!
Short build in length (butt weld) and flanges available
For the temporary use while start up and commissioning